很多养多肉的花友们都会遇到一个问题，随着养的多肉越来越多，品种越来越全，发现自己的花盆不够用了。到最后，买多肉的钱没有多少，反倒是在花盆上花了很多钱。
为了节省买花盆的钱，花友们也是八仙过海各显神通。有用酒瓶的，有用贝壳的，有用旧抽屉的，好多东西都可以用来做多肉花盆。今天和大家分享一种用泡沫箱做花盆的方法。我们可以把多肉的叶子插在箱子里，长成之后就是满满一箱多肉，特别好看！
准备材料
首先我们要提前准备好材料，需要准备的有：干净的泡沫箱、剪刀、栽种多肉的土壤，以及收集来的多肉叶片。
处理泡沫箱
泡沫箱是生活中常见的废物，我们平时买水果或者网购到的东西，都是用泡沫箱包装。准备一个干净的泡沫箱，用剪刀在底部扎几个洞，像上图中一样。
准备多肉叶片
用来叶插的多肉叶片，一定要选择健康饱满的叶子。选择自己喜欢的多肉品种，多掰点，确保可以在箱子里铺一层。
掰叶子的时候，用手捏住叶子，左右摇晃，叶子就会掉下来。掰好的叶子伤口有不少水分，先放在阴凉的通风的地方，晾1~2天，让叶子伤口干燥。
准备多肉土
接下来就是准备多肉土壤。怕麻烦的花友可以直接买配好的多肉土。为了节省成本，这里是自己配的土壤，比例是泥炭土、椰糠、蜂窝煤渣，所有材料等量混合均匀，放在泡沫箱里。
扦插
保持箱内土壤平整，将多肉叶子整齐的摆在土上。叶片正面朝上，背面朝下。也可以把叶子插入土中，不过不能插太深，以防太过潮湿出现腐烂现象。
后期养护
多肉叶子插好后，把泡沫箱放在有散射光且通风的地方，避开直射光照。直射光会让叶子晒伤，变得干枯。温度最好维持在18~25度之间。箱里的土壤要一直有潮气，手摸上去感觉不到潮气就该浇水了，这点非常重要，叶子生根是需要潮气的。
叶片在没有生根之前，不要随便拿起来看。大概2~3周左右，就能看到叶片出芽生根了。这个时候可以逐步增加光照，慢慢恢复到多肉的正常养护。
大约2个月左右，泡沫箱里的多肉叶片都会长成小苗，满满一箱子多肉，什么品种都有，非常好看。
Many of the meat of the flower friends will encounter a problem, with more and more meat, more and more varieties, found that their flowerpot is not enough. In the end, there wasn't much money to buy more meat, but a lot of money to spend on flowerpots. In order to save money to buy flowerpots, flower friends are also eight immortals across the sea each show magical powers. There are bottles, there are shells, there are old drawers, a lot of things can be used to make meat pot. Today I'm going to share with you a way to make a flowerpot out of a foam box. We can put the fleshy leaves in the box, grow up to be a full box of meat, especially good-looking! To prepare the materials, first we need to prepare the materials in advance, including a clean foam box, scissors, succulent soil, and gathered succulent leaves. Deal with foam box, foam box is a common waste in life, we usually buy fruit or online shopping, are packed with foam box. Prepare a clean foam box and cut holes in the bottom with a pair of scissors, as shown in the image above. Prepare fleshy leaves, use fleshy leaves to insert, be sure to choose healthy and plump leaves. Choose your favorite meat-rich varieties, break more points, to ensure that you can lay a layer in the box. When you break a leaf, hold it in your hand and shake it from side to side, and it will fall off. A good leaf wound has a lot of water, first placed in a cool ventilated place, air 1 to 2 days, so that the leaf wound dry. Prepare the succulent soil, then prepare the succulent soil. The flower friend that is afraid of trouble can buy the fleshy soil that matches good directly. In order to save costs, here is their own soil, the proportion is peat soil, coconut bran, honeycomb cinder, all materials equally mixed evenly, placed in the foam box. Cutting, keep the soil in the box level, the fleshy leaves neatly placed on the soil. The blades are facing up and back down. You can also insert the leaves into the soil, but not too deep, in case of too wet rot. After maintenance, after the fleshy leaves are inserted, place the foam box in an area with scattered light and ventilation to avoid direct light exposure. Direct light can cause foliage to burn and dry out. The temperature should be kept between 18 and 25 degrees. The soil in the box should be moist all the time. It is important to water the soil when you don't feel the moisture. Don't pick up the leaf until it has taken root. About 2-3 weeks, you can see the leaves sprout and take root. This time can gradually increase the light, slowly return to the normal maintenance of meat. In about 2 months, the fleshy leaves in the foam box will grow into a small seedling, a box full of fleshy, all varieties have, very beautiful.
